Zero-stop Settings Tutorial
Author: Discoveryopt
Release time: 2024-03-29 06:25:04
View number: 6714
Scope models that feature zero-stop functionality:
Dail the elevation and windage turret at your desired zeroing distance, 25,50,100 yards/meter.
Remove the turret cap by unscrewing the top stainless steel screw with a coin or cartridge case base.
Lossen the zero stop ring by all three set scews
Lower and rotate the zero stop clockwise until the ring extrusion hits the top-notch.
Tighten back all 3 set screws on the zero-stop ring
Install the turret to make the 0 position line up with the indicated center on the scope body.
Reinstall the top stainless steel screw.
Related Products
DISCOVERYOPT HD GEN II 5-30X56SFIR FFP-MRAD-ZERO STOP Diameter:34MM Optics Scopes
$269.99 USD
DISCOVERYOPT ED GEN2 3-15X50SFIR FFP-Z-MRAD Diameter:30MM Optics Scopes
$269.99 USD
DISCOVERYOPT ED-PRS GEN II 5-25X56SFIR FFP-MRAD-ZERO STOP Diameter:34MM Optics Scopes
$349.99 USD
DISCOVERYOPT ED-ELR GEN II 5-40X56SFIR FFP-MRAD-ZERO STOP Diameter:35MM Optics Scopes
$449.99 USD
DISCOVERYOPT LHD 6-24X50SFIR FFP Tube Diameter:30MM Optics Scopes
$199.99 USD
DISCOVERYOPT LHD 8-32X56SFIR FFP-Z Tube Diameter:34MM Optics Scopes
$249.99 USD